Quick Answer
Gold Mining Simulator workers not working is usually normal. Workers are passive bonuses, not people who drive machines. If a worker should swap buckets or mats, put clean spares in the glowing slots beside the machine.
Why are Gold Mining Simulator workers not working?
Workers are working, but you cannot see it. A worker is a perk on one machine, not a person on the claim.
When you assign a worker to a station, it raises that machine's efficiency or durability. Workers never drive the excavator, empty the dump truck or dig dirt for you.
Since 2019, workers no longer create gold on their own. The developers changed them into bonuses. So a worker that does not move on screen is still working.
What does Gold Mining Simulator workers not working look like?
The usual complaints are a worker that never swaps the bucket, or nothing changing after hiring.
| What you see | What it means |
|---|---|
| No worker on screen | Normal. Workers are perks, working out of sight |
| Gold output did not jump | Normal. A worker adds a bonus, not free gold |
| Full bucket never gets swapped | No spare in the glowing spot |
| Full mats never get swapped | No clean spare on the sluice edge |
| Worker bonus stays small | The worker has not been levelled up |
How do you fix Gold Mining Simulator workers not working?
Get them working again in this order. Start with buckets and mats, because swaps are the only visible job.
- Place a spare bucket in the glowing spot. The worker only swaps buckets that sit in the highlighted area. The full one should swap when it fills.
- Put clean mats in the highlighted spots. On a hog pan sluicebox, spares go on the edge of the sluice. They must be empty and clean. A full mat should swap for a clean one.
- Check the worker is assigned to the right machine. One worker covers one machine. Two sluiceboxes need two workers. The bonus should show on that machine.
- Level the worker up. Workers gain 1% experience per day. At 40% and 70% you can promote them, and the bonus only grows after you do. The worker card should show the new level.
Is Gold Mining Simulator workers not working a bug?
Usually not. Only bucket and mat swaps happen on screen. Every other effect is a hidden bonus.
A worker on a station with buckets or mats swaps them at higher levels. That only works when you load replacement buckets or mats into the brackets yourself.
A worker on a machine without buckets or mats is working as a bonus to efficiency or durability. Nothing moves on screen for that worker, and that is not a bug.
Gold Mining Simulator workers not working after these fixes?
Look at the spares once more. Players with assigned workers and mats "nearby" found the mats were not inside the highlighted slots.
A mat lying on the ground next to the sluice does not count. It has to sit in the highlighted spot.
For how hiring, levels and retraining work, read the Gold Mining Simulator workers guide. If buckets fill too slowly, check the Gold Mining Simulator magnetite separator and your Gold Mining Simulator tier 3 setup.
FAQ
Yes. Gold Mining Simulator workers not working on screen still add bonuses to their machine.
There is no spare bucket in the glowing spot. Place one there and the swap starts.
The spares are not in the highlighted spots, or they are not clean.
No. Since 2019, Gold Mining Simulator workers only give bonuses and do not create gold.
Load clean spare mats into the highlighted spots on the sluice edge. Keep one worker working on each sluicebox.
At 40% and 70% experience. Workers gain 1% per day.